Milesight EM500-UDL Ultrasonic Distance Level Sensor – W050
19000 mAh Li-SOCL2 Battery
Resolution: 1 mm
NFC Enabled
Range & accurecy : 0.3 ~ 5 m± 1%FS
Showing 17–29 of 29 results
19000 mAh Li-SOCL2 Battery
Resolution: 1 mm
NFC Enabled
Range & accurecy : 0.3 ~ 5 m± 1%FS
19000 mAh Li-SOCL2 Battery
Resolution: 1 mm
NFC Enabled
Range & accurecy : 0.5 ~ 10 m± 1%FS
R313LA is able to detect the existence of the object nearby. It has an infrared proximity sensor that can detect if there is object existing within it detection range and transmits the detected data to Gateway for display via a wireless network; it uses the SX1276 wireless communication module.
R718PA11 is a wireless communication device for detecting the liquid depth. R718PA11 can detect the depth of the liquid in the container.
The R718PA22 is a wireless communication device that measures the liquid level with an ultrasonic liquid level sensor. Ultrasonic liquid level sensor installed at the bottom of the container, it may measure water, gasoline, diesel and small, medium, large capacity storage tanks (metal, plastic, glass material). R718PA22 main unit and the ultrasonic liquid level sensor communicate via RS485 interface, and the detected data is sent to the other equipment shown which employs compliance LoraWANTM wireless communication protocol standards.
R718PE is a wireless communication device that uses ultrasound to detect the distance between the device and the detected object. The medium the device detects is the air, so the detected object can be any liquid or solid that has a flat and horizontal surface, water level for example.
The main body and the sensor of R718PE communicates via the UART serial port, and the detected data can be transmitted via LoRa communication.
R718PE01 is a wireless communication device that uses ultrasonic waves to measure
distance. The ultrasonic transmission medium of R718PE01 ultrasonic sensor is air, so the
measured object can be any liquid or solid with a certain plane, which can be used for liquid
level detection, material level detection, etc. The detection angle of R718PE01 is about 20 °,
which has a stronger transmission signal and is more suitable for the detection of objects such
as grain heaps and sand.
R718VA is a device to detect the status of toilet water, hand sanitizer level, presence or absence of tissue. This device is connected with a non-contact capacitive sensor can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current water level of positions mounted, or the presence or absence of liquid soap or toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module.
R718VB can detect the toilet water level, hand sanitizer level, presence or absence of toilet paper, it may also be applied to non-metallic pipes (pipe diameter D≥11MM) liquid level detector. This device is connected with a non-contact capacitive sensor which can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current position of liquid level, or the presence or absence of liquid soap, toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module .
R718X is a wireless device that detect distance by ultrasonic ranging sensor.
R718X also equips an NTC temperature sensor and will send alarm message while detecting abnormal temperature.
R720F series is a wireless communication device that can detect the existence of hand sanitizer / water leakage. This device is connected with two electrode rods which
can be used to detect the state of the insufficient amount of hand sanitizer in the hand sanitizer box or whether there is the water leakage in the detection area.
The shape and orientation of electrode rod can be selected according to the needs
(R720FLO,R720FLD,R720FU). The electrode rod can be trimmed to the required
length by self according to the demand.
The function of water leakage detection can choose R720FW.
The R72611 is a wireless communication device that detects the depth of a liquid. The R72611 detects the depth of the liquid in the container. The main part and the sensor are connected via the RS485 interface, and the detected data is transmitted to other devices through the wireless network. The wireless communication method conforms to the LoRaTM protocol standard.
Note: Different types of liquids have different requirements for the sensor, so it is necessary to select the sensor according to the type of liquid.
The RA0711 is a wireless communication device that detects the liquid depth.
The RA0711 can detect the depth of the liquid in the container.
*Different types of liquid have different requirements for sensors, so the sensor needs to be selected according to the type of liquid.
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest smart home & AV updates.
By subscribing, you agree to our privacy policy.
We have something special for you
Use above code to get 20% off for your first order when checkout. Don't miss it.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
No products in the cart.