Dragino LWL-02 Water Leak Sensor
* LoRaWAN v1.0.3 Class A
* Water Leak detect
* 2 x AAA battery
* Uplink on periodically and open/close action
* Remote configure parameters via LoRa Downlink
* Firmware upgradable via program port
Showing all 12 results
* LoRaWAN v1.0.3 Class A
* Water Leak detect
* 2 x AAA battery
* Uplink on periodically and open/close action
* Remote configure parameters via LoRa Downlink
* Firmware upgradable via program port
Water Leak Detection
Probe Type
IP67 Waterproof
LoRaWAN® Wireless
5/10 Years Battery Life
NFC for Configuring
Water Leak Detection
Rope Type
IP67 Waterproof
LoRaWAN® Wireless
5/10 Years Battery Life
NFC for Configuring
Wireless 2-Gang Water Leak Detector (R311W) is a LoRaWAN device compatible with LoRaWAN
protocol (ClassA). When the R311W sensor detects the leak, it will send an alarm message to the
gateway. When the sensor detects no leaks, it will send a message that shows no leak to the gateway.
NETVOX Wireless Water Leak Sensor (R313W) is a LoRaWAN device compatible with
LoRaWAN protocol (ClassA). When the R313W sensor detects the leak, it will send an alarm
message to the gateway. When the sensor detects no leaks, it will send a message that shows no
leak to the gateway.
The device is a LoRaWANâ„¢ device compatible with LoRaWANâ„¢ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
R718WA carries 1 water leak sensor.
It uses SX1276 wireless communication module.
The device is a LoRaWANâ„¢ device compatible with LoRaWANâ„¢ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
R718WA2 carries 2 water leak sensors.
It uses SX1276 wireless communication module.
This device is used for water leakage detection and environmental temperature and humidity detection.
When the water leakage sensor detects water leakage, it will send an alarm message to the gateway.
R718WB is a non-locating leak detection wireless communication device. R718WB can detect the leak status through an external dual-core non-positioning water rope sensor, and send the detected data to data center through the wireless network.
The device is a LoRaWANâ„¢ device compatible with LoRaWANâ„¢ protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway.
R718WB2 carries 2 water rope sensors.
It uses SX1276 wireless communication module.
The R718WBA is a wireless communication device that detects ambient air temperature and humidity and non-locating leak detection. The R718WBA detects the temperature and humidity of the air. At the same time, it detects the presence or absence of water leakage through the 2-core non-locating leak detection sensor line, and transmits the detected data to the gateway through the wireless network. The SX1276 wireless communication module is used.
RA07W is a water leak detector leak locating equipment, which can be connected to water leak sensor through the external four-core positioning leak detection sensor line to detect the water leak location, and transmit the detected data to other devices through the wireless network.
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest smart home & AV updates.
By subscribing, you agree to our privacy policy.
We have something special for you
Use above code to get 20% off for your first order when checkout. Don't miss it.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
No products in the cart.