Dragino WSS07 RS485 Photosynthetically Available Radiation Sensor
* Response Spectrum: 400-700nm
* Measure range: 0-2500 mol/m2•s
* Resolution: 1 mol/m2•s
* Accuracy: ±2%
* Yearly Stability: <= ±2?
IoT Sensors
Showing 33–48 of 299 results
-
-
enLink Status-AF LoRaWAN Air Velocity Sensor
Up to 7 Calibrated ranges
Accuracy: 0.1% per range
Battery life 3+ years
Supplied with multipoint air probes 100mm to 600mm long.
Neoprene rubber gasket duct seals included.
Averages air velocity across the duct.
Compact size 129mm x 67mm x 41mm
Available in 868MHz and 915MHz frequencies. -
G120 – Cellular/Iridium Satellite Hybrid GPS Tracking Device
GPS tracking device and Bluetooth® Gateway with optional Iridium Satellite for out-of-coverage tracking with inputs/outputs, RS-232 Interface, and remote immobilization for fleet management, driver ID, driver safety and behavior monitoring, remote worker safety, theft recovery, and more
- High-precision GPS/GLONASS tracking device wired to vehicles or equipment
- Internal Backup Battery in case of loss of power or tampering
- 1 x Analog Input, 6 x Digital Inputs, 2 x Switched Ground Digital Outputs, 1 x Ignition Digital Input, Switched Power Out
- RS-232 Interface to connect optional Iridium Edge® Module or interface with controllers and sensors
- Configure iButton®, RFID readers and Wiegand Interface for Driver ID
- Accident and rollover detection, speeding, harsh braking, and more
- Built-in Buzzer for in-cab alerts
-
G62 LoRaWAN® – LoRa Vehicle Tracking Device for Fleet Management
Robust and ultra-rugged vehicle and heavy equipment tracking device with inputs/outputs for fleet management, equipment monitoring on LoRaWAN® networks
- High-precision GPS/GLONASS tracking device
- Weatherproof and ultra-rugged IP67 Housing
- Internal Backup Battery in case of loss of power or tampering
- 1 x Analog Inputs, 2 x Digital Inputs, 1 x Switched Ground Digital Output, 1 x Ignition Digital Input
- On-device Odometer Readings
-
G70 – Rugged and Robust GPS Vehicle Tracker
Rugged and robust vehicle, trailer, or heavy equipment tracking device with inputs/outputs, remote immobilization for fleet management, equipment monitoring, driver ID, theft recovery, and more
- High-precision GNSS (GPS/GLONASS/Galileo) wired tracking device
- 1 x Ignition Digital Input, 3 x Digital Inputs, 1 x Analog Input, 1 x Switched Ground Digital Output
- Internal Backup Battery in case of loss of power or tampering
- Driver ID – Configure iButton®, TTL, or Wiegand inputs for Driver ID Readers
- Driver Behavior – Run hour monitoring, accident and rollover detection, speeding, harsh braking and cornering, and more
- Remote Immobilization – Immobilization option to safely disable vehicles and equipment remotely
- Weatherproof and ultra-rugged IP67 housing
- Available in Cellular 2G or LTE-M/NB-IoT versions
-
Lefoo LFS10 Air Velocity Sensor
Specifications:-
Working Voltage: 24V AC/DC?20%
Measuring Range: 0-10m/s,0-15m/s,0-20m/s,0-30m/s
Resolution: 0.01m/s
Output signal: RS485/Modbus, 0~10VDC/4~20mA
Output load: ?500?(Current output),?2k?(Voltage output)
Working temperature: -10-60?
Storage temperature: -20-80?
Probe length: 210mm(optional)
Display: WIth/without LCD backlight display(optional)
Protection Class: Shell IP65,Probe IP20
Material: Shell PC,Probe PA6
Electromagnetic compatibility: EN 61326-1
Certifications: RoHS,CE -
Lefoo LFT2600 Refringent pressure sensor
Measurement range: 0~50Bar
Overload Pressure: 1.5 time of full scales
Accuracy: ?2.0%F.S.?-30~120??/ ?0.8%F.S.?-40~40??
Working Temperature: -40~120?
Storage Temperature: -40~120?
Power Supply: 4.75~5.25VDC
Output: 0.5~4.5VDC
Medium: Gas or liquid compatible with 1Cr18Ni9Ti, 304 stainless steel and hydrogenated nitrile or neoprene
Pressure connection: 7/16-20UNF Internal Thread/7/16-20UNF External Thread
Electrical connection: Packard
Pressure Type: Gauge Pressure G
Protection Grade: IP67
Certification: CE RoHS -
Lefoo R485 differential pressure sensor
Pressure range: 0~100Pa, 0~1,000Pa, 0~10,000Pa
Output signal: 4-20mA/0-5V/0-10V/RS485
Power supply: 10~30VDC
Compensation Temperature: -10~60
Measuring medium: air or non-corrosion gas
Pressure interface: Metal barbed connection, 6.2mm
Protection class: IP54 -
LHT52 indoor LoRaWAN Temperature & Humidity Sensor
Features:
- Wall Attachable.
- LoRaWAN v1.0.3 Class A protocol.
- Built-in Temperature & Humidity sensor
- Optional External Probe
- Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
- AT Commands to change parameters
- Remote configure parameters via LoRaWAN Downlink
- Firmware upgradable via program port
- Support 2 x AAA LR03 batteries.
- Datalog feature
- IP Rating: IP52
Applications:
- Smart Buildings & Home Automation
- Logistics and Supply Chain Management
- Smart Metering
- Smart Agriculture
- Smart Cities
- Smart Factory
-
LHT65N LoRaWAN Temperature & Humidity Sensor
Specification:
Built-in Temperature Sensor:
- Resolution: 0.01 °C
- Accuracy Tolerance : Typ ±0.3 °C
- Long Term Drift: < 0.02 °C/yr
- Operating Range: -40 ~ 80 °C
Built-in Humidity Sensor:
- Resolution: 0.04 %RH
- Accuracy Tolerance : Typ ±3 %RH
- Long Term Drift: < 0.02 °C/yr
- Operating Range: 0 ~ 96 %RH
External Temperature Sensor :
- Resolution: 0.0625 °C
- ±0.5°C accuracy from -10°C to +85°C
- ±2°C accuracy from -55°C to +125°C
- Operating Range: -55 °C ~ 125 °C
-
LSN50v2-D20 — LoRaWAN Waterproof / Outdoor Temperature Sensor
* 1 x DS18B20 Temperature Probe
* Measure Range: -55°C ~ 125°C
* Accurancy: ±0.5°C (max ±2.0 °C)
* Cable Length: 2 Meters -
LSN50v2-D22 — LoRaWAN Waterproof /Outdoor Temperature Sensor
- LoRaWAN v1.0.3 Class A
- Ultra low power consumption
- 2 x External Temperature Probes
- Measure range -55°C ~ 125°C
- Temperature alarm
- Bands: CN470/EU433/KR920/US915
EU868/AS923/AU915/IN865 - AT Commands to change parameters
- Uplink on periodically or Interrupt
- Downlink to change configure
-
LSN50v2-S31 — LoRaWAN Temperature & Humidity Sensor
Temperature Sensor:
- Range: -40 to + 80°C
- Accuracy: ±0.2 @ 0-90 °C
- Resolution: 0.01°C
- Long Term Shift: <0.03 °C/yr
Humidity Sensor:
- Range: 0 ~ 99.9% RH
- Accuracy: ± 2%RH ( 0 ~ 100%RH)
- Resolution: 0.01% RH
- Long Term Shift: <0.25 %RH/yr
-
LSN50v2-S31B – LoRaWAN Temperature & Humidity Sensor
The Dragino LSN50v2-S31B is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
Temperature Sensor:
- Range: -40 to + 80°C
- Accuracy: ±0.2 @ 0-90 °C
- Resolution: 0.01°C
- Long Term Shift: <0.03 °C/yr
Humidity Sensor:
- Range: 0 ~ 99.9% RH
- Accuracy: ± 2%RH ( 0 ~ 100%RH)
- Resolution: 0.01% RH
- Long Term Shift: <0.25 %RH/yr
-
Milesight AM-107 Indoor Ambience Monitoring Sensor
2 * AA Alkaline Batteries / Type-C Port Power Supply E-ink Screen / Smart Display NFC Enabled
IP30 RatedMoniter:-
Temperature, Humidity, PIR, Light, TVOC, Barometric Pressure, Carbon Dioxide (CO2) -
Milesight Am-307 indoor Ambience Monitoring Sensor
4 * 2700 mAh ER14505 Li-SOCl2 Replaceable Batteries or Type-C Port Power Supply E-ink Screen / Smart Display NFC Enabled Emotion Indication Equipped with Traffic Light Indicator and Buzzer Alarm
IP30 Rated
Moniter:-
Temperature, Humidity, PIR, Light, TVOC, Barometric Pressure, Carbon Dioxide (CO2)
End of content
End of content
