19000 mAh Li-SOCL2 Battery
Resolution: 0.01 m
NFC Enabled
Measuring Range & Accurecy: 0 ~ 10m, 0.5FS
Cable Length: At least 1-1.5m longer than measuring range (Customizable)
US$3.00 dollars for one meter extension cable.
Additional inquiry needed when measuring range >10m.
19000 mAh Li-SOCL2 Battery
Resolution: 0.01 m
NFC Enabled
Measuring Range & Accurecy: 0 ~ 5m, 0.5FS
Cable Length: At least 1-1.5m longer than measuring range (Customizable)
US$3.00 dollars for one meter extension cable.
Additional inquiry needed when measuring range >10m.
Power Input: 1 * Type-C
AI Vision Identification Technology
Equipped with Wi-Fi for Web GUI Configuration
Advanced Custom Setting: Up to 12 Mapped Regions for Detection / LoRa D2D Controller / Line Cross Counting
Field of View:
190 ° Horizontal, 112 ° Vertical
Recognition Range:
Based on a radius of 5 meters
(At the Height of 3m)
Recognition Rate: > 95%
1200 mAh Li-SOCL2 Battery
Advanced Features: LoRa D2D Controller
NFC Enabled
1 * LED
Detection Distance:
15 ~ 20 mm
LED:
for Network Status, Open / Close Status
Tamper and Low Battery Indication
Netvox Wireless IR Blaster can be used for IR learning and application. After IR learning, R211 can send the infrared control signal to corresponded electric devices. R211 can receive infrared signal from other infrared device and process predefined action, ex. controlling other LoRa devices.
R311A is equipped with a reed sensor, which can be used to detect the status of the door and window. Through the built-in wireless module, it can achieve wireless alarm and other functions. It uses the SX1276 wireless communication module.
R311B is a Wireless Light Sensor based on the LoRaWAN open protocol (Class A).
When the illuminance exceeds the set threshold, a report will be sent immediately.
Main
Netvox wireless dry contact sensors can be used to detect contact between two wired contact points.
It can realize wireless alarm and other functions through built-in wireless module, and is compatible with
LoRaWAN protocol.
It can be easily networked with other related devices. The R311CA is durable and ensures optimum use and is a low
power consumption device. Due to their small size, they can be installed anywhere, they are wireless, so they take up
very little space.
The R311CB device has a built-in reed switch sensor and can be externally connected to the reed switch. It can be used for door and window switch status detection and externally connected to broken glass sensor to detect the glass status. It uses the SX1276 wireless communication module.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.