R313D has a simple locating function that can detect the location of the device. It regularly reports RSSI and SNR information to the gateway for processing. It can locate the location of the device based on the reported RSSI and SNR information. It adopts SX1276 wireless communication module.
When the vibration sensor moves or vibrates, the R313DA can detect vibrations or moving
signals and transmit the detected data to other devices through the wireless network.
When the vibration sensor moves or vibrates, the R313DB can detect vibrations or moving
signals and transmit the detected data to other devices through the wireless network.
It can detect the sudden movement or vibration of the device and send an alarm signal to the gateway for processing. It uses the SX1276 wireless communication module.
The device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 2^32 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. Apply SX1276 wireless communication module.
The device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing
information of the movement or vibration to the gateway for processing.
R313G built-in photosensitive sensor, can be used for external ambient light intensity detection.
R313G is the environmental illuminance automatic detector and the reporter which can send out the environmental illumination report and is a low-power, long range, wireless sensor that can accurately detect environmental illuminance indoor.
R313K is a tilt detection sensor. When the device (defaults to the vertical direction) has a tilt of 45 degrees or more in any direction, a tilt signal will be issued. The detected data is transmitted to other devices through the wireless network for display.
R313LA is able to detect the existence of the object nearby. It has an infrared proximity sensor that can detect if there is object existing within it detection range and transmits the detected data to Gateway for display via a wireless network; it uses the SX1276 wireless communication module.
The R313MA is a wireless emergency button that detects after pressing the emergency button and sends an alarm message to the gateway.
It uses the SX1276 wireless communication module.
NETVOX Wireless Water Leak Sensor (R313W) is a LoRaWAN device compatible with
LoRaWAN protocol (ClassA). When the R313W sensor detects the leak, it will send an alarm
message to the gateway. When the sensor detects no leaks, it will send a message that shows no
leak to the gateway.
R313WA is a device that detects the presence of a seat and is compatible with the LoRaWAN protocol. If there is someone on the seat, R313WA will send a message to the gateway. When detecting the seat is empty, the device will send a message that restoring to normal status to the gateway.
R602A is a smart wireless alarm that can communicate with other devices through a wireless network. It has a high-decibel speaker and high-brightness LED which can realize sound and light alarms. It adopts SX1276 wireless communication module.
R711 is mainly used to detect the temperature and humidity of indoor air. It transmits the collected data to other devices for display through the wireless network communication module. The device conforms to the LoRa protocol standard.
R712 is a long-range wireless temperature and humidity device based on the
LoRaWANâ„¢
open protocol (Class A). R712 carries a splash-proof housing, and it is mainly used to detect the outdoor air temperature and humidity. It collects data over LoRa® network and sends it to devices to be shown.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.