Dragino LTC2-FS LoRaWAN Food Safety Temperature Sensor
* PT100 Probe
* Installation: Insert
* Measure Range: -50 ~ 200 °C
* Dimension: φ4 * 150mm
* Food Safety
Showing 25–48 of 364 results
* PT100 Probe
* Installation: Insert
* Measure Range: -50 ~ 200 °C
* Dimension: φ4 * 150mm
* Food Safety
* PT100 Probe
* Installation: Insert
* Measure Range: -50 ~ 200 °C
* Dimension: φ4 * 150mm
* Flat Type
* PT100 Probe
* Installation: Insert
* Measure Range: -70 ~ 550 °C
* Dimension: φ4 * 150mm
* High Temperature
* PT100 Probe
* Installation: Insert
* Measure Range: -196 ~ 150 °C
* Dimension: φ4 * 150mm
* Low Temperature
* PT100 Probe
* Installation: Insert
* Measure Range: -50 ~ 200 °C
* Dimension: 4*30mm
* LoRaWAN v1.0.3 Class A
* Water Leak detect
* 2 x AAA battery
* Uplink on periodically and open/close action
* Remote configure parameters via LoRa Downlink
* Firmware upgradable via program port
LoRaWAN v1.0.3 Class A protocol
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
Upload water flow volume
Monitor water waste
8500mAh industrial battery(none-rechargeable)
AT Commands to change parameters
Uplink on periodically and open/close event
Datalog feature
Remote configure parameters via LoRa Downlink
Firmware upgradable via program port
Wall Mountable
DW-006 Flow Sensor: diameter: G3/4” / DN20. 360 pulse = 1 L
LoRaWAN v1.0.3 Class A protocol
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
Upload water flow volume
Monitor water waste
8500mAh industrial battery(none-rechargeable)
AT Commands to change parameters
Uplink on periodically and open/close event
Datalog feature
Remote configure parameters via LoRa Downlink
Firmware upgradable via program port
Wall Mountable
DW-010 Flow Sensor: diameter: G 1” / DN25. 60 pulse = 1 L
LoRaWAN v1.0.3 Class A protocol
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
Upload water flow volume
Monitor water waste
8500mAh industrial battery(none-rechargeable)
AT Commands to change parameters
Uplink on periodically and open/close event
Datalog feature
Remote configure parameters via LoRa Downlink
Firmware upgradable via program port
Wall Mountable
DW-004 Flow Sensor: diameter: G1/2” / DN15. 450 pulse = 1 L
*LoRaWAN v1.0.3 Class A protocol.
*RS485 / Modbus protocol
*AT Commands to change parameters
*Remote configure parameters via LoRaWAN Downlink
*Firmware upgradable via program port
*Powered by external 12v battery
*Back up rechargeable 1000mAh battery
*IP Rating: IP65
*Support default sensors or 3rd party RS485 sensors
*Wall Attachable.
*Resolution: 0.2mm ,
*Accuracy: ?3%
*Rainfall strength: 0mm?4mm/min (max 8mm/min)
*Input Power: DC 5~24v
*Working Temperature: 0??70? ( incorrect below 0 degree, because water become ICE)
*Working Humidity: <100% (no dewing)
*Power Consumption: 4mA @ 12v.
* Wind speed range: 0 ~ 30m/s
* Wind direction range: 0 ~ 360?
* Start wind speed: ?0.3m/s
* Accuracy: ??0.3?0.03V?m/s , ?1?
* Input Power: DC 5~24v
* Interface: RS485
* Working Temperature: -30??70?
* Working Humidity: <100% (no dewing)
* Power Consumption: 13mA ~ 12v.
* Cable Length: 2 meters
CO2:
* Range: 0?5000ppm,
* Accuracy: ?3%F?S?25??
* Resolution: 1ppm
PM2.5 and PM10:
* Range: 0?1000?g/m3
* Accuracy ?3%F?S?25??
* Resolution: 1?g/m3
* Detect if there is rain or snow
* Input Power: DC 12 ~ 24v
* Interface: RS485
* Working Temperature: -30??70?
* Working Humidity: 10?90%RH
* Power Consumption:
? No heating: 12mA @ 12v,
? heating: 94ma @ 12v.
* Temperature Sensor Spec:
? Range: -30 ~ 70?
? Resolution 0.1?, Accuracy: ?0.5?
* Humidity Sensor Spec:
? Range: 0 ~ 100% RH
? resolution 0.1 %RH, Accuracy: 3% RH
* Pressure Sensor Spec:
? Range: 10?1100hPa
? Resolution: 0.1hPa, Accuracy: ?0.1hPa
* Illuminate sensor:
? Range: 0?2/20/200kLux
? Resolution: 10 Lux , Accuracy: ?3?FS
* Detect spectrum: 0.3?3?m?300?3000nm)
* Measure strength range: 0?2000W/m2
* Resolution: 0.1W/m2
* Accuracy: ?3%
* Yearly Stability: <= 2?
* Cosine response: <= 7? (@ Sun angle 10?)
* Temperature Effect: ?2???10??40?)
* Response Spectrum: 400-700nm
* Measure range: 0-2500 mol/m2•s
* Resolution: 1 mol/m2•s
* Accuracy: ±2%
* Yearly Stability: <= ±2?
This Power Splitter is specially designed for helium mining, where you can run 3 miners and 1 antenna setup!
This Power Splitter is specially designed for helium mining, where you can run 4 miners and 1 antenna setup!
· Built-in Saw Filter in both Tx and Rx Link
· With 868MHz amplifier up to 4X more range
· Ultra-low noise figure 2.0dB
· 863-870MHz Full Band Lora Applications
· DC input:RF cable and 2.5*0.7mm DC socket
Kit includes: 1. Bias Tee 2. Amplifier 3. Power Adaptor
Up to 7 Calibrated ranges
Accuracy: 0.1% per range
Battery life 3+ years
Supplied with multipoint air probes 100mm to 600mm long.
Neoprene rubber gasket duct seals included.
Averages air velocity across the duct.
Compact size 129mm x 67mm x 41mm
Available in 868MHz and 915MHz frequencies.
GPS tracking device and Bluetooth® Gateway with optional Iridium Satellite for out-of-coverage tracking with inputs/outputs, RS-232 Interface, and remote immobilization for fleet management, driver ID, driver safety and behavior monitoring, remote worker safety, theft recovery, and more
Robust and ultra-rugged vehicle and heavy equipment tracking device with inputs/outputs for fleet management, equipment monitoring on LoRaWAN® networks
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest smart home & AV updates.
By subscribing, you agree to our privacy policy.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now