Showing 193–216 of 364 results
This device can be connected to an ADC sampling interface device. As shown in the figure, black is the ground line, red is the ADC sampling interface line, and the ADC sampling voltage range is 0-5V. It uses the SX1276 wireless communication module. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).
This device can be connected to an ADC sampling interface device. As shown in the figure, black is the ground line, red is the ADC sampling interface line, and the ADC sampling voltage range is 0-5V. It uses the SX1276 wireless communication module. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).
This device can be connected to an ADC sampling interface device. As shown in the figure, black is the ground line, red is the ADC sampling interface line, and the ADC sampling voltage range is 0-10V. It uses the SX1276 wireless communication module. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).
This device can be connected to an ADC sampling interface device. As shown in the figure, black is the ground line, red is the ADC sampling interface line, and the ADC sampling voltage range is 0-10V. It uses the SX1276 wireless communication module. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).
This device is used for detecting 4mA-20mA signal, 0-24V DC ADC samples and dry contact features which employs SX1276 wireless communication module .
R718IJK can detect 4mA-20mA signal, 0-24V DC ADC sampling signal and dry contact input signal, and send the detection signal data to the gateway, and display the collected data in the monitoring platform.
R718J can be connected to external dry contact devices, such as various switches, buttons, relays and reed switch outputs. It can detect the closure or disconnection signal of the dry contacts. Based on SX1276 wireless communication module, the wireless communication is compatible with LoRaWAN™ protocol (ClassA).
R718J2 can be connected to external dry contact devices, such as various switches, buttons, relays and reed switch outputs. It can detect the closure or disconnection signal of the dry contacts. Based on SX1276 wireless communication module, the wireless communication is compatible with LoRaWAN™ protocol (ClassA).
The Wireless 4-20mA DC Current Meter is designed to offer a large selection of easy-to-use current 4-20mA data loggers for load monitoring. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).
The Wireless 4-20mA DC Current Meter is designed to offer a large selection of easy-to-use current 4-20mA data loggers for load monitoring. The wireless communication is compatible with LoRaWAN™ protocol (ClassA).
This device is equipped with a Hall sensor, which can be used for door and window switch state detection. It can realize wireless alarm and other functions through the built-in wireless module. It applys SX1276 wireless communication module.
This device is equipped with two way Hall sensors, which can be used for door and window switch state detection. It can realize wireless alarm and other functions through the built-in wireless module. It applys SX1276 wireless communication module.
R718MA has a simple positioning function. The device reports its RSSI, SNR information periodically to the gateway. It can be attached to an object, and it sends an alert when it is removed from the premises.
The communication is fully compatible with LoRaWAN™ protocol (Class A).
R718MBA is to detect sudden movement or vibration alert. The communication is fully compatible with LoRaWAN™ protocol (Class A).
The device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 232 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. Apply SX1276 wireless communication module.
The device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value). SX1276 wireless communication module.
R718N1 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the solid-core current transformer, which can be conveniently connected to the measuring device.
R718N115 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
R718N125 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.
The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
The device is powered by battery and obtains the load AC current value through the current
transformer. The device adopts the clamp-on current transformer, which can be conveniently
connected to the measuring device.
The NETVOX wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
R718N3 is powered by battery and obtains the load AC current value through the current transformer. The device adopts the solid core current transformer, which can be conveniently connected to the measuring device.
R718N315 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested.
R718N325 is powered by a battery and receives AC current through a current transformer. This device adopts clamp-on current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.
End of content
End of content
Be the first to know about our new arrivals, exclusive offers and the latest smart home & AV updates.
By subscribing, you agree to our privacy policy.
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now