Anthem MCA 325 GEN 2 3-Channel Power Amplifier
Crafted and designed in Canada, the MCA 325 GEN 2 stand out with custom components such as low-noise high-power toroidal transformers, high-current bipolar output transistors, high-quality filter capacitors, advanced power supply regulators, oversized aluminum heatsinks, custom-designed dual binding posts, and patented auto-on/off circuitry. This superior craftsmanship is evident in the delivery of clean, clear, audiophile-quality sound, with the 3-channel MCA 225 GEN 2 offering an impressive 225 watts per channel continuous power into 8 ohms.
ANTHEM – A PURSUIT OF EXCELLENCE IN PERFORMANCE AND VALUE
In perfect synergy with the state-of-the-art NEW AVM 90 and 70 A/V Processors, Anthem proudly unveils the MCA 525, 325, and 225 GEN 2 power amplifiers, ushering in a new era of audio sophistication. These amplifiers, available in 5, 3, and 2-channel configurations, are not only designed to complement but to elevate the audio experience to unprecedented heights. The innovative MCA Series GEN 2 showcases a harmonious blend of enhanced power efficiency and unyielding reliability, setting a benchmark in audio amplification.
A distinguishing feature of the MCA Series GEN 2 is its commitment to delivering an immaculate audio experience. Lowering the total harmonic distortion (THD), these amplifiers achieve a level of sonic purity that captivates the discerning audiophile. The result is a soundstage characterized by unparalleled clarity and a supremely quiet background, allowing the listener to immerse themselves fully in the nuances of their favorite music or cinematic masterpiece.
Designed and meticulously crafted in Canada, the MCA 525 GEN 2, MCA 325 GEN 2, and MCA 225 GEN 2 stand as testament to a level of engineering excellence unparalleled in the world of amplifiers. Each unit boasts custom components such as low-noise high-power toroidal transformers, high-current bipolar output transistors, high-quality filter capacitors, advanced power supply regulators, oversized aluminum heatsinks, custom-designed dual binding posts, and patented auto-on/off circuitry. This dedication to superior craftsmanship translates into an audio performance that is nothing short of extraordinary, delivering a clean, clear, and immersive audiophile-quality sound experience that spans the entire frequency spectrum.
For those seeking a transcendent auditory journey, the 3-channel MCA 225 GEN 2, with its remarkable 225 watts per channel continuous power into 8 ohms, represents the pinnacle of amplification prowess. It stands as a testament to Anthem’s unwavering commitment to pushing the boundaries of audio excellence, offering a listening experience that is as pure as it is powerful.
MCA 325 GEN 2 Specifications
| POWER OUTPUT (PER CHANNEL) (Continuous RMS, 20 Hz – 20 kHz, <1% THD) |
||||||||||
|
||||||||||
 |
||||||||||
| INPUTS / OUTPUTS | ||||||||||
| Inputs | Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack) | |||||||||
| Outputs | Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack) | |||||||||
| SWITCHES | ||||||||||
| Front Panel | Power (On/Off) | |||||||||
| Rear Panel | 3 On/Off Modes (Trigger, Manual, Auto) | |||||||||
| THD AT 100W | ||||||||||
| at 1 kHz | 0.0010% | |||||||||
| at 20 kHz | 0.015% | |||||||||
| IMD AT 100 W | ||||||||||
| ITU-R (19 kHz + 20 kHz) | 0.0005% | |||||||||
| SMPTE (60 Hz + 7 kHz) | 0.002% | |||||||||
| FREQUENCY RESPONSE, 20 HZ TO 20 KHZ | ||||||||||
| open circuit | ± 0.1 dB | |||||||||
| 8Ω | ± 0.1 dB | |||||||||
| 4Ω | ± 0.1 dB | |||||||||
| 2Ω | ± 0.2 dB | |||||||||
| OTHER SPECIFICATIONS | ||||||||||
| SNR, IEC-A, ref. 225 W | 120 dB | |||||||||
| Power Bandwidth, -3 dB at 200 W into 8 ohms | 90 kHz | |||||||||
| Slew Rate | 30 V/μs | |||||||||
| Damping Factor, 20 Hz to 1 kHz | 300 | |||||||||
| Channel Separation, 100 Hz to 10 kHz | >65 dB | |||||||||
| Input Impedance (RCA / XLR) | 10 kΩ / 15 kΩ | |||||||||
| Input Sensitivity, 225 W into 8 Ω | 1.5 Vrms | |||||||||
| Voltage Gain | 29 dB | |||||||||
| POWER CONSUMPTION | ||||
| standby | idle | typical | high output | |
|---|---|---|---|---|
| MCA 525 (Gen. 2) | 2.0 W | 80 W | 550 W | 1200 W |
| MCA 325 (Gen. 2) | 1.4 W | 47 W | 350 W | 750 W |
| MCA 225 (Gen. 2) | 1.0 W | 35 W | 240 W | 500 W |
| DIMENSIONS | ||
| Height | 6-5/8” (16.9 cm) | |
| Height with Rackmount Kit | 4U | |
| Width | 17-1/4″ (43.9 cm) | |
| Depth | 18-1/8″ (46 cm) | |
| WEIGHT | ||
| MCA 525 (Gen. 2) | 61 lb (27.5 kg) | |
| MCA 325 (Gen. 2) | 43 lb (19.5 kg) | |
| MCA 225 (Gen. 2) | 40 lb (18 kg) | |
| POWER REQUIREMENT | ||
| 120 V version: | In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz. | |
| 220-240 V version: | In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. | |
| Weight | 19.5 kg |
|---|---|
| Brand | Anthem |
Only logged in customers who have purchased this product may write a review.
Related products
-
-
-
-
Denon AVC-X8500HA 13.2CH 8k AV Receiver
د.إ21,950 -
Reviews
There are no reviews yet.