Netvox R718NL13-Wireless Light Sensor and 1-Phase Current Meter with 1x30A Clamp-On CT

28 people are viewing this right now
7 products sold in last 17 hours
Selling fast! Over 16 people have this in their carts

The NETVOX Wireless Light Sensor and 1-Phase Current Meter with 1x30A Clamp-On CT is used to detect single-phase electrical input current and ambient light intensity detection.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway.
The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.

• Apply SX1276 wireless communication module
• 2 section of ER14505 battery (3.6V / section) in parallel
• Protection level: Main body IP53; Clamp-On CT IP30
•The base is attached with a magnet that can be attached to a ferromagnetic material object
• The clamp-on CT allows easier installation to the device you would like to detect the current from
• LoRaWANTM Class A compatible
• Frequency Hopping Spread Spectrum (FHSS)
• Third-Party online wireless sensor monitoring and notification system to configure sensors, view
data and set alerts via SMS text and email (optional)
• Available third-party platform: Actility/ThingPark, TTN, MyDevices/Cayenne
• Improved power management for longer battery life

Electric:

Power supply

2 section of ER14505 battery (3.6V / section) in parallel

Battery life

Battery life are 5 years
(condition: ambient temperature 25 ℃, report once every 30 mins, txpower = 20dBm, LoRa spreading factor SF = 10)

Stand-by current 36uA
Wake-up current 7mA
RF receiving current 11 mA @ 3.3V
RF emission current 127 mA @ 3 .3 V
Battery measurement accuracy ± 0.1V

Current measurement error value

± 1%
Current resolution 1mA

Current measurement accuracy

100mA to 30 A
(varies according to the configuration of the current transformer)

*Specific electrical characteristics may vary depending on the power supply voltage

Frequency:

Frequency range 863MHz-928MHz 470MHz-510MHz
TX Power US915   20dbm;
AS923   16dbm;
AU915   20dbm;
CN470   19.15dbm;
EU868   16dbm;
KR920   14dbm;
IN865    20dbm;
Receiving sensitivity -136dBm
(LoRa, Spreading Factor = 12, Bit Rate = 293bps);
-121 dBm
( FSK, Frequency deviation = 5kHz, Bit Rate = 1.2kbps)
Antenna type Built-in antenna
Communication distance 10 km
(the actual transmission distance depends on the environment. )
Data transfer rate 0.3kbps ~ 50k bps
Modulation system mode LoRa / FSK (Note: you can choose one of them)
Available LoRaWAN Band

EU863-870, US902-928, AU915-928, KR920-923, AS923, CN470-510
(Note: optional, to be done in the factory configuration)

Physical:

Size

Main body size: L: 112 mm * W: 88.19 mm * H: 32 mm
Sensor size: H: 32 * L: 26.4 * W: 16mm

Main Body Weight

Approximately 141 g

Sensor Weight

About 30g

Sensor External Wiring Length

Approximately 900mm

Ambient Operating Temperature Range

-20℃ ~ 55℃

Ambient Storage Temperature Range

-40℃ ~ 85℃

Ambient Humidity Range

<90% RH (non-condensing)

Fixed Way

Screw / magnet

Brand

Netvox

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.