Remora3 Battery-Powered GPS Tracker Long Battery Life + Bluetooth Gateway

21 people are viewing this right now
15 products sold in last 6 hours
Selling fast! Over 14 people have this in their carts

Ultra-rugged, long-life battery-powered GPS asset tracking device and Bluetooth® Gateway featuring 10+ years of battery life and tamper detect

  • Deploy-once battery life with up to 10+ years movement-based tracking, 2 years at most aggressive (second-by-second) tracking performance
  • Bluetooth® 5.2 Gateway for tagged asset management and sensor monitoring
  • Powered by off-the-shelf Lithium Thionyl Chloride (LTC) batteries for extreme temperature operation
  • Tracks assets when they’re on the move and enters sleep mode when stationary to conserve power
  • Battery Meter with ‘Battery Low’ and ‘Battery Critical’ alerts
  • Weatherproof and ultra-rugged IP67 Housing
  • Magnetic Tamper Detect
  • LTE-M / NB-IoT Connectivity

Remora3 Features

High Precision

GPS, GLONASS, Galileo positioning systems are used simultaneously for enhanced accuracy and faster fixes.

Bluetooth® Gateway

Bluetooth® 5.2 Gateway for affordable tagged asset management and sensor monitoring applications.

Rugged & Weatherproof

IP67 rated housing ensures the device can withstand fine dust, high-pressure spray, submersion for 30 minutes in 1m of water, and extreme temperatures.

Off-the-Shelf Batteries

Powered by 2 x D Cell Lithium Thionyl Chloride (LTC) batteries for enhanced temperature operation (-30°C to +60°C).

Battery Life Monitoring

Battery Meter with ‘Battery Low’ and ‘Battery Critical’ alerts.

Wire-Free Installation

Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more. Stainless steel screws supplied.

LTE-M/NB-IoT Network Roaming

Supports automatic roaming between LTE-M and NB-IoT networks with minimal delay and marginal impact on battery life or performance (roaming SIM required).

Flexible Configuration

Configure device parameters such as heartbeat rate, movement and accelerometer settings, and more to fit any tracking application.

Periodic or Movement-Based

Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.

Sleep Mode

Stationary devices enter sleep mode, switching the update rate to only twice per day until movement occurs to conserve battery life and optimize data usage.

Impact Detection

Configure impact-detection alerts when g-forces are exceeded by a user-defined threshold.

Run Hour Monitoring

Capture run hours based on movement to understand and optimize asset utilization.

Preventative Maintenance

Set reminders based on distance travelled and run hours to reduce maintenance and repair costs.

Tip Detection & Rotation Counting

Axis angle reporting, tip detection and rotation counting (planned).

Theft Recovery

Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval.

Advanced Geofencing

Create custom geofences and alerts if an asset enters or leaves specific locations. Geofences can also be downloaded directly to the device for enhanced location-based behaviors.

 

Manufacturer

Digital Matter

Brand

Digital Matter

CONNECTIVITY

Bluetooth, Cellular, LTE-M / NB-IoT versions

Bluetooth® 5.2 Gateway

Bluetooth® 5.2 gateway reports nearby Bluetooth® tags and sensors for affordable tagged asset management and sensor monitoring.

SIM Size & Access

Internal Micro 4FF SIM

BATTERIES

*Lithium Thionyl Chloride (LTC), 2 x D Cell (3.7V per cell). Batteries not included.

Battery Life Monitoring

“Battery Low” and “Battery Critical” alert levels

Battery Life Estimates

Hourly location updates – 10+ years, Movement-Based location updates – 10+ years, Once Daily location updates – 20+ years

Chipset

Sony CXD5612

Constellation

Concurrent GPS / GLONASS / Galileo

Tracking Sensitivity

-147dBm cold start / -161dBm hot start

Location Accuracy

~1m 2D RMS, GPS, -130dBm

GNSS Assistance

GNSS almanac data for greater sensitivity and position accuracy

Low Noise Amplifier

GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail

Cell Tower Location

Cell tower fallback for positioning when there is no GNSS or Wi-Fi signal

Safety

Reverse Polarity Protection and Fuse Protection

Input Voltage

5-16V DC

Sleep Current

<10uA* *Average current in lowest power configuration

Dimensions

222 x 91 x 41 mm (8.74 x 3.58 x 1.61”)

Weight

430g

Housing

Ultra-Rugged IP67 Housing

Installation

Compact and concealable. Multiple installation options for covertly and easily securing the device to assets with screws, bolts, cable ties, rivets, and more.

Operating Temperature

-30°C to +60°C

Cellular Antenna

Internal

RF Antenna

Internal

GPS Antenna

Internal

3-Axis Accelerometer

3-Axis Accelerometer to detect movement, high G-force events, and more

Flash Memory

Store weeks of records if device is out of cellular coverage. Storage capacity for over 1 month of continuous 30-second logging.

Diagnostic LED

Diagnostic LED indicates operation status

On-Board Speed and Heading

Current speed and heading is reported with each position update

On-Board Temperature

The device reports internal temperature which provides an indication of ambient temperature but may not always be precise

Auto-APN

Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware

Geofence Alerts

The server can use device location to create geofences and alerts if an asset enters or leaves designated locations

Impact Detection

Configure impact-detection alerts when G-forces are exceeded by a user-defined threshold

Geofence Download to Device

Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts. Maximum of 500 Geofences with up to 100 points per geofence.

Intelligent Power Management

Early registration abort saves power when out of cellular coverage

Preventative Maintenance

Set reminders based on distance traveled and run hours to reduce maintenance and repair costs

Sleep Mode

Stationary devices enter sleep mode until movement occurs to conserve battery life and optimize data usage

Run Hour Monitoring

Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization

Periodic or Movement-Based Tracking

Configure parameters to send updates based on set time intervals or when movement occurs. Adaptive tracking technology detects when the device is on the move and increases the update rate, providing detail when you need it while conserving battery when stationary.

Theft Recovery

Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval

Tamper Alerts

Magnetic tamper switch provides an instant alert if the device is removed from your asset

Tip Detection & Rotation Counting

Axis angle reporting, tip detection and rotation counting

Flexible Configuration

Configure device parameters such as position update rate, movement and accelerometer settings, and more to fit any tracking application.

Device Management Platform

Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system

Configuration App

Manage device firmware updates and parameters via DM-Link provisioning tool.

INTEGRATION

Cloud-Based Solver, TCP Direct or HTTPS Webhook

Security

Military-level AES-256 Encryption from device to Device Management Platform to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

Warranty

Two-year manufacturer’s warranty.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.