Soil Salinity Sensor (RS485)

25 people are viewing this right now
17 products sold in last 17 hours
Selling fast! Over 3 people have this in their carts

Multiple outputs
7~24V (when the output signal is RS485, 0~2V)
12~24V (when the output signal is 0~5V, 0~10V, 4~20mA)
Need RS485/Lorawan node

Unit of Measurment: mS/cm or uS/cm (1mS/cm=1000uS/cm)
Measuring Range: 0 ~ 20 mS / cm
Measuring Parameter: Soil Salinity Value
Resolution: 0.001 mS/cm (1 uS/cm)
Accurecy +-2%

Soil Salinity Sensor

IP68 WaterProof:
Can be buried in the water and soil for long time

Small size and high precision:
Small size, high precision and fast response speed

Good Sealing:
Epoxy resin sealed, can be directly buried in the soil, without corrosion

Small impact and wide range:
small impact on soil quality, wide application range

Reliable performance and high effieciency:
stable performance, fast response speed, high data transmission effeciency

Installation:

Soil Surface measure method
1. Select a representative soil environment to clean up surface debris and vegetation
2. Insert the sensor vertically and completely into the soil
3. If there is a hard object, the measurement location should be replaced and re-measured
4. For accurate data, it is recommended to measure multiple times and take the average

Buried measure method
1. Make a soil profile in the vertical direction, slightly deeper than the installation depth of the bottommost sensor, between 20cm and 50cm in diameter.
2. Insert the sensor horizontally into the soil profile
3. After the installation is completed, the excavated soil is backfilled in order, layered and compacted, and horizontal installation is guaranteed.
4. If you have the conditions, you can put the removed soil in a bag and number it to keep the soil moisture unchanged, and backfill it in reverse order.

Measure Notes
1. The sensor needs to be used in 20% -25% soil humidity environment
2. All probe must be inserted into the soil during measurement.
3. Avoid excessive temperature caused by direct sunlight on the sensor. Pay attention to lightning protection in the field
4. Do not pull the sensor lead wire with force, do not hit or violently hit the sensor.
5. The protection grade of the sensor is IP68, which can soak the entire sensor in water.
6. Due to the presence of radio frequency electromagnetic radiation in the air, it should not be energized in the air for a long
time.

Brand

HondeTec

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.